BlueCast X5 LCD/DLP
Castable: YES
Castability: Excellent
Compatible with: All LCD printers like Wanaho D7, Anycubic, ZORTRAX, Prusa, Phrozen, Micromake L2, X-Cube, Xayav V, etc. (405 nm with 30 watts led or a higher power)
Washing mode: Ethyl / Clean IPA alcohol for 30 seconds → Dry with compressed air
UV cure: Not required
Shrinkage: Irrelevant
Color: Light Blue
Primer Cat: Suggested
Size: 500 g
Description
BLUECAST X5 FOR LCD/DLP 3D PRINTERS
– Custom synthesized oligomer by BlueCast, not available to the market, the patent is going to be applied.
– Excellent casting of small engravings both positive and negative
– Fits all jewelry needs from filigree to medals as well as dental one
– Excellent for stones presetting
– Curing triggering tuned to maximize antialias smoothing
– No monomer inside, no smell
– No aggression on plastic parts (tested on PS, PMMA)
– No post-curing needed for casting
– No shrinkage
– Easy welding with wax, forget about pattern lost into investment
– Can be polished, engraved, drilled (post-cure is needed)
– Low viscosity, easier to recover uncured resin from models, easy to wash
– No preheating required
– Very little hygroscopic while liquid, no water absorption while printed
– Atoxic, solvent-free, very low phospine content, very low skin irritant
– Cleaner burnout, 0,00% ash residual
– Suitable for fast burnout
– Full burnout also at a lower temperature (750 °C)
– No expansion during burnout, sublimation starts at 130 °C
– Excellent dimensional stability in time, no need to stock in cold/dark places
Videos
